+ Reply to Thread
Results 1 to 8 of 8
  1. 03-12-2009 05:18 PM #1
    Ixlr8w
    Ixlr8w is offline
    Member
    Location
    mississauga
    PWC
    seadoo gts
    Posts
    11

    Default no spark seadoo gts 717

    1997 gts seadoo : Hello to all as im trying to find out why my sea doo has no spark i have narrrowed the problem to the stator / coil or the mpem, does anyone know how to test resistance in the stator/coil - yellow wire, yellow black wire/ black red, black wire wire, this has had me scratching my head for some time , ive pulled the stator plate off and noticed the coil was slightly burt on the bottom ive just recieved my used stator plate assembly from and ebay dealer in the states and notince i have no resistance in the coil blackred wire black wire, any help would be greatly appreciated, cheers
    Reply With Quote Reply With Quote
  2. 03-12-2009 09:33 PM #2
    Turbo HJ60
    Turbo HJ60 is offline
    Member
    Location
    Delta B.C.
    PWC
    Seadoo GTI/GTX
    Posts
    47

    Default

    Have you got it going yet?
    No spark start simple fuses connection. Stator is for the charging system no relation to the spark. Check to see if you have batt. voltage to the coil plus ground. If so then I would say it is up stream from there and if not work the other way. Mpem I take it that is like the ECU correct?? check source voltage. Not a PWC tech but a Toyota tech. Keep me posted will help as best a s I can.. Just trying to picture this in my head..
    Good Luck
    Reply With Quote Reply With Quote
  3. 03-13-2009 01:59 AM #3
    Ixlr8w
    Ixlr8w is offline
    Member
    Location
    mississauga
    PWC
    seadoo gts
    Posts
    11

    Default

    Hi and thankyou for the reply, from what i could make of it, the stator sends power to the coil and branches off to the mpem (ecu) ((Black Red wire)) im getting no resistance or volts from this wire as i crank the motor, inspected the generating coil at stator plate and notice a hole burned through, the fuses are good, purchased a new complete "good" stator including generating coil and want to know how to test it, just want to rule out the stator/ generating coil prior to moving up the the computer, the ingnition coil is new mpem ecu computer beeps no fues blown ect
    Reply With Quote Reply With Quote
  4. 03-14-2009 04:43 AM #4
    Ixlr8w
    Ixlr8w is offline
    Member
    Location
    mississauga
    PWC
    seadoo gts
    Posts
    11

    Default

    help please..............
    Reply With Quote Reply With Quote
  5. 03-14-2009 11:41 AM #5
    Ixlr8w
    Ixlr8w is offline
    Member
    Location
    mississauga
    PWC
    seadoo gts
    Posts
    11

    Default

    got spark yea
    Reply With Quote Reply With Quote
  6. 03-29-2009 11:11 AM #6
    Jet-x
    Jet-x is offline
    Member Jet-x's Avatar
    Location
    GTA
    PWC
    95 xp800
    Posts
    40

    Default

    If you need help, give me a call maybe I can help.

    647-280-7850


    Ryan
    Reply With Quote Reply With Quote
  7. 03-29-2009 02:53 PM #7
    Chester
    Chester is offline
    Member Chester's Avatar
    Location
    Surrey, BC Canada
    PWC
    98 SXi Pro
    Posts
    109

    Default

    The stator IS part of the ignition system. You should have 40 - 76 ohms between the black wire and the black/red wire.

    Chester
    4 out of the 5 voices in my head say, pull the trigger!

    Chester
    Reply With Quote Reply With Quote
  8. 11-22-2009 04:02 AM #8
    Ixlr8w
    Ixlr8w is offline
    Member
    Location
    mississauga
    PWC
    seadoo gts
    Posts
    11

    Default

    done...... thanks for all the advice..... cheers John
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules