Results 1 to 5 of 5
Thread: recommend a plug wire set?
-
08-31-2009, 11:01 AM #1
- Location
- Vancouver Island
- PWC
- 1995 WR3
- Posts
- 20
recommend a plug wire set?
I Want new wires for my old waverunner but being new to these craft I have no idea on which set of wires are the best choice. I will oneday upgrade the coil so I want some wires that will be acceptable to a higher output coil.
I figure any work needed might as well be done HI-Performance.
Thanks for any suggestions
95 wr3 701
-
08-31-2009, 12:21 PM #2
- Location
- Barrie, ON
- PWC
- X2
- Posts
- 330
-
09-01-2009, 12:37 AM #3
- Location
- Vancouver Island
- PWC
- 1995 WR3
- Posts
- 20
Thanks for the insight X2
Guess I could pick up the coil and wires for now.
The runner is 14 years old it should be do for new electrics before they just stop on their own.. I'll do some investigating into the parts.
Might as well ask here, Anybody have a MSD coil they would like to sell ? possible a cdi as well.
1995 701 motor
-
09-01-2009, 06:13 AM #4
- Location
- South Carolina
- PWC
- 92 Superjet, 98 GSXL, 06 SXR, 96 Superjet, 07 Superjet, 99 GP800
- Posts
- 10
The coils very rarely ever go bad, it's usually just the wires and the MSD coil isn't any better than OEM. If you want the best solution currently available, send your coil to John @ Jetskisolutions. For $65 he will replace the wires with a special cable and MSD boots and you will never have any problems again.
http://www.jetskisolutions.com/p49_k...placement.html
The MSD Enhancer is available online at Amazon.com for $177.50 shipped anywhere in the US but I'm not sure if they have it available to Canada yet. I have acted as the middle man for a couple transactions already if you are interesed in one. I have been sending them north for $210usd shipped which just covers my cost, I do it as more of a favor for my fellow Canadians.Last edited by Boykid88; 09-01-2009 at 06:16 AM.
92 Freestyle Superjet, 98 GSXL SS, 06 SXR, 96 Freeride Superjet, 07 Freeride Superjet, 99 GP800
-
09-01-2009, 06:22 PM #5
- Location
- Vancouver Island
- PWC
- 1995 WR3
- Posts
- 20
Thanks for your offer to ship the Enhancer, In the future I may pm you about the Enhancer. I'll have to do some looking on this end of our continent to see what is available. I'm thinking a bigger badder coil out of bigger hp/cc Yamaha of some description-to Help give it a bigger fatter spark.
I could make a Frankenstein....
with the enhancer tossed in to finish the job.
I will post back on a coil I find worthy, If in fact I can find a coil that is worthy of replacing the stock one with.
Similar Threads
-
Unsolved Kawasaki Ultra 150 Wet Plug Problems
By Kawasaki18 in forum KawasakiReplies: 5Last Post: 10-15-2009, 12:57 PM -
PWC Insurance in Ontario - Who do you recommend
By mikey.himself in forum General PWC ChatReplies: 0Last Post: 04-16-2008, 09:34 AM
Bookmarks