Results 1 to 8 of 8
  1. #1
    Member
    Location
    oakville ontario
    PWC
    89 turd sx w/ a 750
    Posts
    36

    Default Need 650sx head and jugs(cylinders)

    As the title states im in need of a 650sx head and the jugs.

    please let me know if you have anything.

    Thanks Cory

    http://www.flickr.com/photos/41339306@N05/4944074765/
    Last edited by Beacom; 09-19-2010 at 01:04 PM.

  2. #2
    Internet Meter Maid
    Location
    barrie ont. can.
    PWC
    the superjet
    Posts
    389

    Default

    pm sent

  3. #3
    Member
    Location
    oakville ontario
    PWC
    89 turd sx w/ a 750
    Posts
    36

    Default

    Need a 650 sx head aswell let me know aftermarket or stock.
    Still looking for the cylinders/ jugs too

    bumpp.. Dont think i got your pm?

  4. #4

    Default

    I have a set of jugs ... more than one set actualy .. and i have a set of used pistons that may work with it or a set of new pistons with rings that woudk rqure a re-bore .. I also have a good cylinder head as well ...
    sent yo a email reply

  5. #5

    Default

    oh just noticed you are in oakville not a very far drive ,, or i can bring them to work .. work at the ford plant right off the qew

  6. #6
    Member
    Location
    oakville ontario
    PWC
    89 turd sx w/ a 750
    Posts
    36

    Default

    Yeah i actually already bought new pistons of std. size that wsm stuff or whatever. So are the jugs in good condition and do they need to be honed ?

  7. #7

    Default

    you bought STantdard size not a overbore size ? well i have a stock cylider .. havnt removed it from teh engine yet looking through at t with head removed should be ok .. but i also have a replacement used pitson fopr that .. ususlly you are going to want a fresh rebore on a cylinder with oversize pistons ! you can come up and take a look at what i have if you wish ... would only want 50 for a cylinder and 20 for teh head ... take both head and cylinder for $60 ..

  8. #8
    Member
    Location
    oakville ontario
    PWC
    89 turd sx w/ a 750
    Posts
    36

    Default

    Alright send me your address in an email so i know where you are located. I have to head back to school tonight in north york so im not sure if i have enough time to go out to hamilton area

Similar Threads

  1. 61X cylinders
    By junkyardj in forum Parts - Wanted
    Replies: 0
    Last Post: 06-05-2009, 06:44 PM
  2. Need kawi 650 jugs??
    By good_2_go in forum Parts - Wanted
    Replies: 2
    Last Post: 06-03-2009, 09:16 AM
  3. SeaDoo '95 GTX cylinders 657x
    By MuskieMikie in forum Parts - Wanted
    Replies: 0
    Last Post: 03-17-2009, 04:53 PM
  4. Need a 770 crank, bottom end, jugs, and pistons
    By Cleetus in forum Tigershark
    Replies: 0
    Last Post: 03-16-2009, 02:24 PM
  5. 1998 SLXH Running on two of three cylinders
    By Ellis_Performance in forum Polaris
    Replies: 4
    Last Post: 09-07-2008, 05:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •