Results 1 to 1 of 1
  1. #1
    Member
    Location
    whitby ont.
    PWC
    polaris msx150
    Posts
    1

    Unhappy msx 150 drive issue

    My 2004 mxs150 has broken the bolts in the crankshaft that go through the flywheel.Has anyone have information on this.Dealer says ski not worth fixing.Only 134hrs on machine and taken very good care of.WHAT TO DO? In jan.2012 flywheel and shaft assembly was sent to machine shop to be tested.The shaft is within spec. and the flywheel is not out of round or causes a vibration on a lathe.still no answers. HELP More to come as we get deeper into it. I have taken apart the drive.I sent out the driveshaft and flywheel to be tested.The shaft came back only .oo3 out from one end to the other and flywheel is also good.Now looking at all the bearings and mounts.JUNE 12 We found the bearing was seized somewhat and have rebuilt it with new parts.PROBLEM we are unable to tighten up the shaft,and unable to find a tool.HELP
    Last edited by kkent02; 06-12-2012 at 06:16 PM.

Similar Threads

  1. Hard start hot, motor mount shim issue
    By toddschick in forum Yamaha
    Replies: 1
    Last Post: 06-07-2010, 05:02 PM
  2. Quick tip video 'greasing the drive shaft'
    By SideFX in forum Sea-Doo
    Replies: 0
    Last Post: 09-21-2007, 09:17 AM
  3. Replies: 4
    Last Post: 07-29-2005, 10:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •