I built this ski for myself, only the best parts were installed.
The motor came from a 1997 Kawasaki 1100 zxi, rebuilt top to bottom, new crank bearings, rods, pistons. Has a high compression R&D cylinder head, boysen reeds with stuffers, 38mm cdkII carbs with K&N flame arrestors, 16/23 skat-trak prop, R&D top loader intake grate, stock steering with aftermarket bars and odi lock on grips.
With this setup the ski is reaching 62 mph on the GPS.
A little bit of fading on the nose of the ski but the rest is fine.

Make your offer, just want to start an other project.

Click image for larger version. 

Name:	IMG_20130728_185402.jpg 
Views:	12 
Size:	265.8 KB 
ID:	2856Click image for larger version. 

Name:	IMG_20130728_185508.jpg 
Views:	8 
Size:	247.4 KB 
ID:	2857Click image for larger version. 

Name:	IMG_20130728_185312.jpg 
Views:	7 
Size:	210.2 KB 
ID:	2858Click image for larger version. 

Name:	IMG_20130727_035812.jpg 
Views:	6 
Size:	176.5 KB 
ID:	2859

Shipping in Canada is possible, most likely is around the 400$ mark.